Click below to order product online Door Controller DC2010 US$260

DC2010 Door Controller is a compact, quick and easily installed door controller. It supports readers of Wiegand output format from 26-bit up to 130-bit. It has two on board relays that can be used to control door locks and alarms. It has two inputs, one can be used for exit detection and another can be used for door sensor. The DC2010 communicates with host through RS485 connection.

System Development Kit (SDK) is available for DC2010 door controller. SDK includes complete command set for controlling DC2010 controller. A high level DLL supporting .net framework 4.0 is also available for ease of development. System developers can use the SDK to develop their own application.

Request Design Specification of SDK

Click below to order product online

• Door Controller DC2010 US$260

  

To download documentation

• DC2010 Door Controller Specification

Click below to order product online Door Controller DC2020 US$320

DC2020 is a standalone door controller

It operates without connecting to host computer. User card is added to the internal flash memory of DC2020 using Supervisor Card. The Supervisor Card can also be changed. The internal memory can be erased when needed. When a valid user card is read, the on-board door open relay will be turned on to allow access to the protected area.Enables system developer to write his own application software using the API in .net framework 4.0

Request Design Specification of SDK

Click below to order product online

• Door Controller DC2020 US$320

To download documentation

• DC2020 Door Controller Specification

Click below to order product online Door Controller MA6010 US$370

MA6010 is a door controller with Ethernet interface

It enables system developer to write his own application software using the API in .net framework. It stores user and access right according to previous user setting during online/offline mode. It connects to existing LAN system by TCP/IP to a central computer

Request Design Specification of SDK

Click below to order product online

• Door Controller MA6010 US$370

To download documentation

• MA6010 Door Controller Specification

Click below to order product online Event Server MA1300 US$520

Key Component of the Smart Access Control System

Enables system developer to write his own application software using the Software Development Kit (SDK) which is not included

Stores user and access right according to previous user setting during online/offline mode

Supports up to 8 door controllers (MA1201) on RS-485 network up to 1.2 Km

Connects to existing LAN system by TCP/IP to a central computer which can monitor many event servers connected in different areas

Click below to order product online

• Event Server MA1300 US$520

To download documentation

• MA1300 Event Server Specification

Software Development Kit

• Includes Software API, one Event Server (MA1300), two Door Controllers (MA1201), two Wiegand readers (MA1003)
• Event server is the key component of the Smart Access Control System that stores user and access right according to previous user setting during online/offline mode
• Support up to 8 door controllers (MA1201) on RS-485 network up to 1.2 Km (4000 ft)
• Connect to existing LAN system by TCP/IP to a central computer which can monitor many event servers connected in different area
• Improve your bottom line by tracking employee performance adn puntuality using Time Attendance Software
• No nee to re-key your entire facility everytime an employee or tenant leave

Request Design Specification of SDK

Click below to order product online Door Controller MA1201 US$260

Key Component of the Smart Access Control System

MA1201 is an intelligent single door controller. It uses standard RS485 communication protocol to connect to the host system and supports up to 2 readers (in and out) per unit.

Controlled by Smart Access Event Server (MA1300)

Click below to order product online

• Door Controller MA1201 US$260

To download documentation

• MA1201 Door Controller Specification

Software Development Kit

• Includes Software API, one Event Server (MA1300), two Door Controllers (MA1201), two Wiegand readers (MA1003)
• Event server is the key component of the Smart Access Control System that stores user and access right according to previous user setting during online/offline mode
• Supports up to 8 door controllers (MA1201) on RS-485 network up to 1.2 Km (4000 ft)
• Connects to existing LAN system by TCP/IP to a central computer which can monitor many event servers connected in different areas
• Improves your productivity by tracking employee performance and punctuality using Time Attendance Software
• No need to re-key your entire facility everytime an employee or tenant leave

Request Design Specification of SDK

Click below to order product online I/O Controller MA1601 US$200

I/O Controller supports 12 inputs and 12 relay outputs per unit. Connect to host system using standard RS-485 communication protocol. Modular design allows for easy and scallable installation. Up to 16 units of I/O boards (MA1601) can be connected via RS-485. It can be integrated with MaCaPS Lift Control System.

Click below to order product online

• I/O Controller MA1601 US$200
  

To download documentation

• MA1601 IO Controller Specification